Product information · use & handling guide
Evafresh Ultra Cleaner
Version 1.0 · Revised 13 October 2026
Evaclear Trading Enterprise
Boko, Kumasi, Ghana
A heavy-duty cleaner based on citric acid. It removes limescale, soap scum, hard-water marks and built-up grime, and its surfactants help lift grease from cookers and hoods. Because it is acidic, keep it off natural stone.
Safety label
Signal word
Warning
Hazards
- H319 — Causes serious eye irritation.
Precautions
- P101 — If medical advice is needed, have product container or label at hand.
- P102 — Keep out of reach of children.
- P305+P351+P338 — IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P313 — If eye irritation persists: Get medical advice/attention.
- P501 — Dispose of contents and container in line with local regulations.
Use it for
- Limescale and hard-water marks on taps, sinks, showers and tiles
- Soap scum on baths and shower screens
- Built-up grime and grease on cookers, gas stoves and extractor hoods
- Kettles and stainless steel (rinse well)
Do not use on / for
- Marble, terrazzo, granite, limestone and other natural stone
- Aluminium and unsealed concrete (test first)
- Use with bleach or any other product
How to use
- Wear rubber gloves.
- Spray or apply onto the surface, leave for 2–5 minutes.
- Scrub, then rinse thoroughly with clean water. Always rinse food-contact surfaces.
How much to use (dilution)
- Heavy limescale or soap scumUse undilutedLeave up to 5 minutes, then rinse.
- Cookers and hoodsUndiluted, or 1 part to 2 parts waterRinse with a damp cloth.
- General heavy cleaning1 part to 10 parts waterRinse after use.
1 tablespoon ≈ 15 ml · 1 teaspoon ≈ 5 ml. Measure — don't guess: using more does not clean better.
Tips
- Test first on a small hidden area.
- Rinse surfaces thoroughly before using bleach on them — acids and bleach must never meet.
Never mix with
- Evafresh Thick Bleach or any chlorine product — releases toxic chlorine gas
- Any other cleaning product
Protect yourself
Rubber gloves recommended for long or repeated use and sensitive skin. Avoid spraying towards the face.
First aid
- Eyes
- Rinse with clean water for several minutes. Remove contact lenses if easy to do. If irritation continues, get medical advice.
- Skin
- Rinse with water. If irritation develops, get medical advice.
- Swallowed
- Rinse the mouth with water and give a glass of water to drink. Do NOT make the person vomit (foam can enter the lungs). Get medical advice and show the label.
- Breathed in
- Not expected to be a hazard in normal use. If discomfort occurs, move to fresh air.
Emergency: dial 112 or go to the nearest hospital. Take the container or label with you.
Handling
- Read the label before use and follow the directions.
- Keep the cap tightly closed when not in use.
- Do not mix with other cleaning products.
- Wash hands after use.
- Use in a well-ventilated area.
- Never transfer into drinks bottles or unlabelled containers.
Storage
- Store in the original, closed container, upright, in a cool, dry place out of direct sunlight (below 35 °C).
- Keep out of reach of children and pets, away from food and drink.
- Store away from bleach and alkaline cleaners. Do not store in metal containers.
- Protect from freezing and do not store in hot vehicles.
Best used within 12 months of purchase when stored as directed.
Spills
- Keep children and pets away. Wear gloves.
- Mop up or absorb with cloths, sand or sawdust, then rinse the area with water.
- Spilled product is very slippery — clean up straight away.
Disposal
- Small household amounts: rinse away down the drain with plenty of water.
- Large amounts or spills: do not pour into rivers, gutters or soil. Contact Evaclear or a licensed waste company for advice.
- Empty containers: rinse with water and recycle, or bring your empty 4.5 L and 25 L gallons back to Evaclear for a refill discount.
Ingredients
Aqua (Water), Citric Acid, Decyl Glucoside, Sodium Carbonate, Sodium Laureth Sulfate, Coco Betaine, Polyquaternium-7, Propylene Glycol, Sodium Chloride, Disodium EDTA, Sodium Benzoate.
Contains: <5% anionic surfactants; <5% non-ionic surfactants; <5% amphoteric surfactants; <5% sodium carbonate; 5–15% citric acid; preservative: sodium benzoate.
pH: About 2 – 3 (acidic, estimated)